| Nome | Colore | |
|---|
| 1 X Arm Mechanical, Straight with Clips at 90 degrees (Vertical Grip) | Dark Bluish Gray | |  |
| 1 X Arm Mechanical, Battle Droid | Dark Bluish Gray | |  |
| 4 X Arm Mechanical, Battle Droid | Dark Bluish Gray | | |
| 1 X Sticker for Set 8016 - (85153/4542684) | (Not Applicable) | |  |
| 2 X Technic, Axle and Pin Connector Perpendicular Double Split | Black | |  |
| 2 X Technic, Axle and Pin Connector Perpendicular 3L with 2 Pin Holes | Dark Bluish Gray | |  |
| 2 X Technic Engine Crankshaft Center | Dark Bluish Gray | |  |
| 4 X Technic, Pin with Friction Ridges Lengthwise WITH Center Slots | Black | |  |
| 8 X Technic, Pin 1/2 | Light Bluish Gray | |  |
| 2 X Technic, Axle 2 Notched | Red | |  |
| 2 X Technic, Liftarm 1 x 2 Thick | Black | |  |
| 2 X Technic, Liftarm 1 x 2 Thin | White | |  |
| 2 X Technic, Liftarm 1 x 3 Thin | Light Bluish Gray | |  |
| 4 X Technic, Liftarm 1 x 3 Thick | Light Bluish Gray | |  |
| 1 X Rubber Belt Medium (Round Cross Section) - Approx. 3 x 3 | Blue | |  |
| 4 X Bar 6L with Stop Ring | Light Bluish Gray | |  |
| 4 X Technic, Axle 5.5 with Stop | Dark Bluish Gray | |  |
| 3 X Minifig, Weapon Gun, Blaster Short (SW) | Black | |  |
| 4 X Antenna 1 x 4 | Black | |  |
| 4 X Hinge Cylinder 1 x 3 Locking with 1 Finger and Pin with Friction Ridges Lengthwise on Ends | Black | |  |
| 4 X Hinge Brick 1 x 2 Locking with 2 Fingers Vertical End | Black | |  |
| 4 X Technic, Brick 1 x 2 with Holes | Black | |  |
| 3 X Plate 2 x 12 | Black | |  |
| 2 X Plate 2 x 8 | Black | |  |
| 3 X Plate 2 x 6 | Black | |  |
| 9 X Plate 2 x 4 | Light Bluish Gray | |  |
| 6 X Plate 2 x 4 | Dark Bluish Gray | |  |
| 1 X Plate 1 x 8 | Dark Bluish Gray | |  |
| 2 X Plate 2 x 2 | Dark Bluish Gray | |  |
| 1 X Plate 1 x 6 | Light Bluish Gray | |  |
| 3 X Plate 1 x 4 | Dark Bluish Gray | |  |
| 7 X Plate 1 x 2 | Light Bluish Gray | |  |
| 3 X Tile, Modified 4 x 4 with Studs on Edge | Dark Bluish Gray | |  |
| 8 X Tile, Modified 1 x 2 Grille with Bottom Groove / Lip | Black | |  |
| 4 X Plate, Modified 1 x 2 with Handle on Side - Closed Ends | Tan | |  |
| 3 X Plate, Modified 1 x 2 with Handle on Side - Free Ends | Black | |  |
| 8 X Plate, Modified 1 x 2 with Clips Horizontal (thick open U clips) | Light Bluish Gray | |  |
| 5 X Tile 2 x 2 with Groove | Dark Blue | |  |
| 6 X Tile 1 x 2 with Groove | Dark Blue | |  |
| 8 X Plate, Round 2 x 2 with Rounded Bottom (Boat Stud) | Light Bluish Gray | |  |
| 4 X Plate, Round 1 x 1 Straight Side | Trans-Red | |  |
| 2 X Plate, Round Corner 4 x 4 | Dark Bluish Gray | |  |
| 3 X Wedge, Plate 8 x 3 Right | Dark Bluish Gray | |  |
| 3 X Wedge, Plate 8 x 3 Left | Dark Bluish Gray | |  |
| 2 X Wedge, Plate 4 x 2 Right | Dark Blue | |  |
| 1 X Wedge, Plate 4 x 2 Left | Dark Blue | |  |
| 2 X Wedge, Plate 3 x 3 Cut Corner | Dark Blue | |  |
| 1 X Wedge, Plate 3 x 2 Left | Dark Bluish Gray | |  |
| 2 X Slope, Inverted 45 2 x 1 | Dark Bluish Gray | |  |
| 4 X Slope, Curved 6 x 1 Inverted | Dark Bluish Gray | |  |
| 8 X Cone 1 x 1 with Top Groove | Trans-Red | |  |
| 4 X Slope, Inverted 33 3 x 2 with Connections between Studs | Light Bluish Gray | |  |
| 8 X Brick, Round 1 x 1 Open Stud | Light Bluish Gray | |  |
| 4 X Wedge 4 x 4 No Top Studs | Dark Blue | |  |
| 2 X Wedge 6 x 4 Triple Curved | Dark Bluish Gray | |  |
| 2 X Brick, Round Corner 10 x 10 with Slope 33 Edge, Axle Hole, Facet Cutout | Dark Bluish Gray | |  |
| 4 X Wedge 2 x 16 Triple | Dark Blue | |  |
| 1 X Brick 2 x 6 | Tan | |  |
| 2 X Brick, Modified 1 x 1 with Handle | Light Bluish Gray | |  |
| 1 X Brick, Modified 1 x 2 with Handle | Tan | |  |
| 2 X Brick 1 x 3 | Tan | |  |
| 3 X Brick 2 x 3 | White | |  |
| 1 X Brick 2 x 4 | Black | |  |
| 1 X Technic, Pin 1/2 | Light Bluish Gray | | |
| 1 X Technic, Pin with Friction Ridges Lengthwise WITH Center Slots | Black | | |
| 1 X Plate, Round 1 x 1 Straight Side | Dark Bluish Gray | |  |
| 1 X Plate, Round 1 x 1 Straight Side | Trans-Red | | |
| 1 X Wedge 6 x 4 Triple Curved with Red Arrows on Dark Blue Background Pattern (Sticker) - Set 8016 | Dark Bluish Gray | |  |
| 1 X Wedge 6 x 4 Triple Curved with Black Vent Lines on Dark Blue and Dark Bluish Gray Background Pattern (Sticker) - Set 8016 | Dark Bluish Gray | |  |
| 1 X Wedge 4 x 4 No Top Studs with Red Eight-point Star on Dark Blue Background Pattern (Sticker) - Set 8016 | Dark Blue | |  |
| 1 X Brick, Round Corner 10 x 10 with Slope 33 Edge, Axle Hole, Facet Cutout with Dark Blue Rectangles Pattern Model Right Side (Stickers) - Set 8016 | Dark Bluish Gray | |  |
| 1 X Brick, Round Corner 10 x 10 with Slope 33 Edge, Axle Hole, Facet Cutout with Dark Blue Rectangles Pattern Model Left Side (Stickers) - Set 8016 | Dark Bluish Gray | |  |
| 4 X Wedge 2 x 16 Triple with Jagged White and Gray Triangles Pattern (Sticker) - Set 8016 | Dark Blue | |  |
| 1 X Tile, Modified 4 x 4 with Studs on Edge with Arrow and Red Dot on Dark Blue and Dark Bluish Gray Pattern Pattern Model Left (Sticker) - Set 8016 | Dark Bluish Gray | |  |
| 1 X Tile, Modified 4 x 4 with Studs on Edge with Arrow and Red Dot on Dark Blue and Dark Bluish Gray Background Pattern Model Right (Sticker) - Set 8016 | Dark Bluish Gray | |  |
Отзывы о наборе LEGO 8016